Skip to content

HVAC

HVAC Repair in Greater Dallas Area

Arthur Heating & Air

Need HVAC repair now? We fix AC and heating fast with same-day and 24/7 emergency service. Our licensed and insured team, TACLB29253E, delivers honest work backed by a family-owned, customer-first approach. Serving the Greater Dallas Area, including Dallas, Plano, and Garland. Rated 5.0 from 541 reviews. Before peak summer, stay ahead with quick repairs that restore comfort. Call or book online today.

Why Choose Us

  • Licensed and insured

    Texas license TACLB29253E on every job

  • Same-day and 24/7

    Emergency crews available day or night

  • Family owned service

    100 percent satisfaction guarantee practices

  • Clear, fair pricing

    Upfront repair options and financing available

  • Local HVAC experts

    5.0 rating from 541 reviews

Pricing · HVAC Repair

What you can expect to pay

Repair usually costs $150 – $5,000.

100%rate the price fair or betterMarket average 93%

Repair

$150 – $5,000
Within typical · area $101 – $4,000

No add-ons or discounts on record. The range covers most jobs.

Coupons & specials

Offers & savings

View all offers

Reviews

What Our Customers Say

Customers mention

  • speed1
  • professionalism1
  • quality1

Based on the reviews shown here.

  • Same day service. Technicians were nice, friendly, clean and professional.
    Linda N.
  • Clint was friendly and professional, his work was excellent, and the price was honest and fair.
    Austin T.

FAQs

Frequently asked questions

Still have questions?

Why Is My AC Running But Not Cooling Properly?

Arthur Heating & Air says an AC that runs but isn’t cooling is usually caused by restricted airflow, low refrigerant, dirty coils, or a control fault. The most common starting point is airflow—think a clogged filter or a blocked outdoor condenser reducing heat transfer. These issues are routine and fixable; a slightly undercharged system often runs nonstop because the indoor coil can’t absorb heat well. We solve these problems for homeowners throughout the Murphy area with accurate diagnostics and repair, and 24/7 emergency service is available when comfort can’t wait.

  • Replace a dirty air filter and make sure supply/return vents are open.
  • Gently clear leaves and debris from the outdoor condenser fins.
  • Confirm the thermostat is set to Cool and below room temperature.
  • If it’s still warm, a technician may perform refrigerant leak detection/recharge, clean coils, repair blower or fan motors, or correct control board/sensor faults.

Turn the system off before cleaning the outdoor unit and call a licensed technician if cooling does not return.

Updated: 2026-11-08

Need help in Murphy, TX? Call (469) 515-2900 or book online. "10 minutes. AC is fixed at very reasonable price. Highly recommend." — Daisy C.

Why Is My AC Running But Not Blowing Cold Air?

If your AC runs but isn’t blowing cold air, common causes include low refrigerant, a clogged air filter, a faulty thermostat, or frozen evaporator coils. Our licensed, highly trained technicians diagnose refrigerant, compressor, electrical, and airflow issues, often on the first visit with fully stocked vehicles. We offer same-day and 24/7 emergency service in Carrollton and Dallas.

  • Set the thermostat to Cool and lower the setpoint.
  • Replace or clean the air filter.
  • If you see ice on coils or lines, turn the system off to thaw.

Updated: 2025-12-12 00:00:00

Need help in Carrollton, TX? Call (469) 515-2900 or book online.

"Excellent response time. Very courteous and professional HVAC technician. Fair price." — John T.

What is the average cost to fix a furnace?

Arthur Heating & Air does not publish a single average cost to fix a furnace because pricing depends on the specific part, labor, and system condition confirmed after diagnosis. The biggest driver is which component failed, since small sensors often cost far less than motors or control boards. Minor issues are typically repairable; if you’re facing a cracked heat exchanger or repeated failures on an older furnace, it may be smarter to consider replacement. We serve homes across the Rockwall area with accurate diagnostics focused on finding the root cause before any work. For 2026, a $49 Service Call is available; final repair pricing is provided after inspection.

If you’re comparing estimates, consider these common cost factors:

  • Component required (igniter/flame sensor vs inducer, blower motor, control board, or heat exchanger)
  • System type and size (gas vs electric, high-efficiency parts availability)
  • Access and timing (attic or tight spaces, after-hours emergency work)

Schedule a professional diagnosis as soon as you notice symptoms to prevent a small fault from damaging other parts.

Updated: 2026-07-11

Need help in Rockwall, TX? Call (469) 515-2900 or book online.

What is the HVAC 5000 rule for repair or replacement?

The HVAC 5,000 rule says to multiply the system’s age (in years) by the repair cost (in dollars); if the total is over 5,000, replacement usually makes more sense, and if it’s under 5,000, repair often is reasonable. It’s a quick way to judge whether a big repair on an older, less efficient unit is worth it. Beyond the math, technicians also weigh safety, warranty status, energy use, and overall reliability during a full inspection. Our team applies this guideline during in‑home evaluations throughout the Richardson area to help homeowners choose with confidence.

  • Signs to lean toward replacement:
  • A major repair on an older system
  • Multiple breakdowns within a short period
  • Noticeably higher energy bills or uneven comfort Schedule a professional assessment to confirm the calculation and document system condition before you decide.

Updated: 2026-09-05

Need help in Richardson, TX? Call (469) 515-2900 or book online. "Knowledgeable repair technician and quickly repaired the damage." — Carl N.

What Is the Average Furnace Repair Cost for Homeowners?

Arthur Heating & Air does not publish a single average furnace repair cost; final pricing is confirmed after an on-site diagnosis. Costs vary because each failure has a different root cause and repair path, from electrical corrections to component replacement. In our Richardson-area work, access in tight attic spaces can influence labor time and total price. Current coupon: $49 service call (terms apply).

Key factors that change the price:

  • Component type and availability (control board, fan motor, or electrical repair)
  • System age and overall condition
  • Access and install location affecting labor time
  • After-hours emergency vs scheduled service
  • Warranty or Comfort Club 15% repair discount eligibility

Schedule a diagnostic visit to receive a clear, written estimate before you authorize any work.

Updated: 2026-07-05

Need help in Richardson, TX? Call (469) 515-2900 or book online.

What Is The Most Common AC Repair For Homeowners?

The most common AC repair for homeowners is fixing a refrigerant issue—locating a leak and recharging to the proper level. Low refrigerant is a leading cause of weak cooling and coil icing because the system can’t move heat. Other everyday fixes address airflow problems or electrical faults that stop fans or the blower. Arthur Heating & Air serves the Carrollton area and focuses on precise diagnostics and repairs that solve the root cause. If leaks repeat, weigh continued repair against a planned replacement.

Schedule service if you notice:

  • Warm air or missed setpoint
  • Ice on refrigerant lines or coil
  • Short-cycling with quick on/off
  • Unusual noises or weak airflow

Turn the AC off if ice appears to protect the compressor until a technician checks it.

Updated: 2026-08-01

Need help in Carrollton, TX? Call (469) 515-2900 or book online. He quickly addressed the issue and help save us from overheating in the house. Provided BEST service and explained what was wrong, why it was wrong and how to go about fixing it. — Anne B.

What Is The Average Cost Of Residential Furnace Repair?

Furnace repair pricing isn’t one-size-fits-all; costs vary by problem, parts, and system condition. A licensed technician will diagnose first and give you upfront pricing on site. To reduce your bill, we offer a $49 service call for troubleshooting, $25 off a system repair, and Comfort Club members receive 15% off repairs plus 24/7 emergency service at no extra charge. Our fully stocked vehicles help complete many repairs the same day in Dallas and Rowlett.

Updated: 2025-12-21 00:00:00

Need help in Dallas, TX? Call (469) 515-2900 or book online. "5 Star service! Knowledgeable repair technician and quickly repaired the damage." — Carl N.

What Does HVAC Repair Usually Include For Homeowners?

HVAC repair for homeowners usually includes a full system diagnostic and the targeted fixes needed to restore safe, efficient heating or cooling. Most issues start with normal wear or small control faults that a trained tech can pinpoint quickly. A seasoned technician will verify signals from the control board and sensors first, because a bad command can mimic a failed motor. We handle these repairs routinely for homeowners in the Allen area.

What a typical visit may cover:

  • Electrical and control board repairs
  • Compressor or fan motor repair/replacement
  • Refrigerant leak detection and recharge
  • Thermostat and sensor troubleshooting
  • Heat pump defrost cycle or reversing valve repair
  • Airflow verification and duct connection fixes
  • 24/7 emergency availability, plus parts-and-labor warranties with a 100% Satisfaction Guarantee

If a major component is failing or problems repeat, discuss repair vs. replacement with a pro before running the system again.

Updated: 2026-10-01

Need help in Allen, TX? Call (469) 515-2900 or book online.

Learn more

Helpful resources

18 guides

Need Professional HVAC Service in Dallas-Fort Worth?

Restore your home's comfort with dependable HVAC service from our skilled technicians in Dallas-Fort Worth and surrounding communities.

Call nowSchedule service